Skip to content
Austin planning-cost guide

What flooring work can cost in Greater Austin

Dated Completa project-price examples for LVP, engineered hardwood, carpet, and hardwood screen-and-recoat work in Austin.

Direct answer

Start with the scope—not an unsupported unit rate.

Installed flooring is not material price times square feet. A complete planning scope includes waste, removal, disposal, subfloor or slab condition, moisture control, installation method, transitions, baseboards, doors, appliances, stairs, occupancy, and the stated product tier.

Calculated examples

Every range keeps its exact scope attached.

The center figure is the dated project-price example for the work shown. The low-to-high range reflects uncertainty around that same scope. It is not a separate market average, checkout total, or promise that changed work will stay inside the range.

Project-price examples—not quotes or checkout totals

Each displayed figure is a dated, non-binding Completa project-price example for the exact work stated—not a contractor bid, offer, final quote, guaranteed price, or promise that a contractor will perform the work for that amount. Actual project prices can differ when the information provided, site conditions, current costs, contractor review, or scope changes. It is not the customer checkout total. If a project proceeds, checkout separately shows the contractor-reviewed project price, any applicable Customer Service Fee or payment-processing fee, applicable Sales Tax, and the total due before payment authorization. The accepted written project scope and any approved written changes control the final scope and price.

Exact exampleIncluded scopeQuantity basisProject-price range
750 sq. ft. LVP replacement over slab

Better-tier click-lock LVP with carpet and pad removal, moisture barrier, transitions, baseboard handling, door undercuts, appliance reset, and haul-off.

What this example accounts for
This is a full installed-system example, not material multiplied by area. It includes better-tier LVP, carpet and pad removal, moisture barrier, transitions, baseboard handling, door undercuts, one appliance reset, and haul-off.
Verify before agreement
Confirm a field measure and waste layout, exact product and attached-pad requirements, slab moisture and flatness, transition and doorway counts, baseboard condition, appliance type, and occupied access.
Outside this example
Slab leveling, moisture remediation, crack repair, stairs, toilets, extensive furniture movement, hazardous flooring or adhesive, and premium pattern layouts.
750 sq. ft.
$6,065$8,206
Calculated project-price example: $7,135
Calculated unit price for this example only: $8.09$10.94 / sq. ft.
750 sq. ft. engineered-hardwood glue-down

Engineered hardwood over slab with carpet removal, adhesive and moisture-control materials, transitions, baseboard work, and haul-off.

What this example accounts for
The material and installation system drive this above floating LVP: engineered hardwood, glue-down labor, adhesive and moisture-control materials, carpet removal, transitions, baseboard work, and haul-off are all included.
Verify before agreement
Confirm exact plank and adhesive specifications, field measure and waste, slab moisture and flatness, acclimation requirements, transition count, baseboard condition, and manufacturer warranty rules.
Outside this example
Grinding or self-leveling, moisture remediation, structural subfloor repair, stairs, custom borders, occupied-home furniture handling, and removal of tile or glued flooring.
750 sq. ft.
$7,103$9,610
Calculated project-price example: $8,356
Calculated unit price for this example only: $9.47$12.81 / sq. ft.
750 sq. ft. stretch-in nylon carpet

Standard nylon carpet with premium rebond pad, moderate seams, and light furniture handling in an occupied home, including existing-carpet removal, transitions, cleanup, and disposal.

What this example accounts for
The result covers a better-tier installed carpet system in an occupied home: standard nylon, premium rebond pad, moderate seam work, removal and disposal, transitions, and light furniture handling.
Verify before agreement
Confirm the roll-width and seam layout, exact carpet and pad, measured waste, substrate condition, tack-strip condition, transition count, remaining furniture, and installation access.
Outside this example
Stairs, patterned carpet matching, water or mold remediation, subfloor repair, heavy furniture or contents, baseboard replacement, and premium fiber upgrades.
750 sq. ft.
$4,825$6,528
Calculated project-price example: $5,677
Calculated unit price for this example only: $6.43$8.70 / sq. ft.
500 sq. ft. hardwood screen and recoat

Light-wear hardwood with cleaning, abrasion screening, compatibility check, finish coat, and cleanup; not a full sand-and-refinish scope.

What this example accounts for
Screen-and-recoat is credible only because this scenario has light finish wear, no exposed wood, no color change, and a compatible existing floor. It is deliberately narrower than full sanding and refinishing.
Verify before agreement
Perform an adhesion and contamination test; confirm no wax or polish, bare wood, deep scratches, water staining, cupping, loose boards, or uncertain engineered wear layer.
Outside this example
Full sanding, stain-color changes, board repair, gap filling, water-damage correction, structural work, stairs, and furniture beyond the stated light handling.
500 sq. ft.
$1,479$2,001
Calculated project-price example: $1,740
Calculated unit price for this example only: $2.96$4.00 / sq. ft.

The effective unit rate is calculated from this complete example. It is not a transferable quote, checkout total, or unit-price promise for another job.

How quantity affects the estimate

A measurable base with the missing work added back.

The calculation starts with measured installed area, adds material waste, and separately accounts for the selected flooring, removal, preparation, transitions, trim, access, and other confirmed work.

What moves the number

The most important price drivers stay visible.

01

Product and installation system

Click-lock LVP, glue-down engineered hardwood, stretch-in carpet, and a hardwood recoat use different materials, labor phases, and quality controls.

02

Removal and disposal

Carpet and pad, glued flooring, tile, and sheet goods do not share one demolition burden. Haul-off and occupied-home handling must be explicit.

03

Subfloor, flatness, and moisture

Slab moisture, active leaks, deflection, contamination, and leveling can change the compatible installation method or require a separate repair.

04

Transitions and finish work

Reducers, thresholds, baseboards, quarter-round, door undercuts, stair work, appliance resets, and furniture movement are real scope—not free details.

On-site review conditions

Some conditions should be inspected before price is confirmed.

These are not ordinary add-ons. They are conditions where photos and measurements may be insufficient to establish a project-specific scope and price.

  • Active moisture or structural movement

    Active water, cupping, soft subfloor, slab moisture beyond the product system, or suspected structural movement require field review before using a direct installation range.

  • Unknown hazardous removal

    Older resilient flooring or adhesive with unresolved hazardous-material risk should not be priced as ordinary demolition.

Common questions

How to read this guide responsibly.

Do these examples equal the customer checkout total?
No. They are dated, non-binding project-price examples for the stated work. If a project proceeds, checkout separately shows the contractor-reviewed project price, applicable customer or payment-processing fees, applicable Sales Tax, and the total due before payment authorization. The accepted written project scope and any approved written changes control the final project scope and price.
Why are the effective per-square-foot examples higher than material ads?
The examples include the stated installed scope—such as waste, removal, disposal, moisture control, transitions, trim, access, and other labor—not just the retail surface material.
Does the floor area guarantee the final price?
No. It fixes one major quantity. The product, installation method, existing floor, substrate, moisture, transitions, trim, stairs, access, and selected finish work still have to match.
Continue planning

Use the example. Then replace its assumptions with yours.

Completa collects the project details that make a real-time estimate explainable. A matched local pro reviews the project-specific facts and confirms or adjusts the price before work begins.

Start in Completa